Installing a lift is a major investment that improves accessibility and adds value to any building. However, before taking this step, it is essential to understand the process of installing a lift and what factors can influence its lifespan.
What steps are followed to ensure a successful installation and what are the most relevant aspects to take into account? In this article, we will explain the detailed process so that you know each stage and know what expectations to have throughout the project.
Process for installing a lift
The process of installing a lift involves several phases, starting with the initial planning and ending with the commissioning. Each stage is essential to ensure that the lift is working properly and comply with safety regulations. Below we detail the main steps in this process.
Analysis and development of the project
The first step in the process is to carry out a comprehensive study of the location where the lift will be installed. This includes analyzing the structure of the building, assessing the needs of the client as well as the building and determining what type of lift is most suitable.
During this phase of the process to install a lift, a preliminary design is also drawn up that includes both technical and aesthetic aspects. This is a key moment to define the budget and obtain an estimate of the project timelines.
Document management
Once the planning has been completed, the next step is to obtain the necessary permits and licenses for the installation of the lift. In Spain, this procedure may vary depending on the autonomous community and the type of building.
It should be submit a detailed technical project to the local authorities, and the time to receive approval can range from a few weeks to several months. It is essential to manage this step efficiently to avoid time extensions in the process.
Preparing the space
The next step in the process of installing a lift is to adapt the area where it will be installed. In new construction projects, this is easier, as the lift shaft is usually planned from the original design of the building. In contrast, in existing structures, significant modifications may be necessary to prepare the space.
Another key part of this phase is the adaptation of electrical and mechanical installations. It is essential that the space meets all technical and regulatory requirements in order to proceed with the installation.
Installation of the lift system
Once the space is ready, the lift itself is installed. Here, the main components are installed, such as the cabin, the rails, the traction or hydraulic system, and the motor. Depending on the type of lift chosen, this phase can last between one and three weeks.
It is mandatory to ensure that every part of the system is perfectly aligned and functioning according to technical specifications to avoid future problems.
Trial period and adjustments
Once the lift has been installed, a series of operational and safety tests are carried out. These tests are essential to ensure that all systems operate correctly and comply with current regulations.
Aspects such as the operation of the doors, emergency brakes and electrical systems are checked. In addition, fine adjustments are made to the speed and comfort of the journey. This phase usually lasts about a week.
Inspection and commissioning
The last step in the process of installing a lift is the official inspection by the competent authorities. In Spain, it is mandatory that an inspector certifies that the lift complies with all safety regulations before it can be used.
Once approval has been obtained, the lift is put into operation and is ready for use. This final step can take from a few days to a couple of weeks, depending on the availability of the inspector and compliance with all requirements.
What is needed to install a lift?
In addition to knowing the process for installing a lift, it is important to understand what requirements are necessary to carry out this installation. Below, we explain some of the most relevant aspects that must be met before starting the project.
Electrical connection
A lift requires a suitable electrical connection that is capable of supporting the energy consumption of the system. It is essential to ensure that the building's electrical infrastructure is prepared for the installation, which may involve upgrading existing systems or adding new connections.
Budget
Budget is another key aspect in the process of installing a lift. Costs can vary considerably depending on the type of lift, the characteristics of the building and the complexity of the installation. In addition to the initial costs, it is important to take into account maintenance costs and periodic reviews required by law.
Local regulations
Each country, and even each region, has its own regulations regarding the lift installation. In Spain, lifts must comply with the UNE-EN 81 standard, which regulates both safety in construction and maintenance.
It is mandatory that the project complies with these regulations to avoid legal problems and ensure the safety of users.
At Eleva Balear we are specialists in lifts
At Eleva Balear, we stand out for offering a comprehensive lift installation service, optimizing each phase of the process so that our clients enjoy a impeccable result in the shortest possible time. Our extensive experience and success stories support our ability to execute complex projects in both new and old buildings.
One of the aspects that sets us apart is the speed with which we manage each project. We reduce project times in the installation of lifts in Mallorca without compromising quality, our team of highly qualified technicians and our personalized approach adapt to the characteristics of each building.
If you are looking for a reliable and efficient company, Eleva Balear is your best option. Contact us through our website to request your quote. Our commitment is to ensure the accessibility of your building with fast and safe solutions. Contact us!
